DIY Home Accents | Cute Beltz

Do-it-yourself home accents transform any space into one you can call your very own. Follow these tips to make over any room with budget-friendly projects you can complete in a weekend.

Chevron Vase

101962149_jpg_rendition_largest

Customize a plain vase by taping off a chevron pattern with painter’s tape (it need not be perfect). Spray-paint the exposed area with a lighter shade of the vase color. Remove the tape when the paint is dry.

Memo Board

101187681_jpg_rendition_largest

This magnetic memo board is as functional as it is stylish. Simply cut decorative paper to fit inside a cookie sheet and glue it to the pan. Add magnets and important papers, notes, or letters, and you’re ready for business. Place it on a desk or hang it in the kitchen to ensure your family always stays on task.

Rosette Lampshade

101481296_jpg_rendition_largest

Embellish a plain lampshade with paper roses. Use a compass to draw an 8-inch-diameter circle onto drawing-weight paper. Cut the circle into a swirl to create a paper coil about 1/2 inch wide. Roll the paper tightly starting at the outside end of the coil. Release the coil slightly and manipulate it until you have created a flower shape, then hot glue it at the base to retain the shape. Use hot-glue to adhere roses to the lampshade.

Ombré Dyeing

101891897_jpg_rendition_largest

Hot from the runway, ombré dyeing is a variation on basic tub dyeing giving fabrics a subtle, ethereal look. We put the trendy technique to work on these ordinary, store-bought throw pillows. For maximum results, always make sure you take the process slowly and follow through with each step

What you’ll need (per pound of dry fabric):

  • 1/4 cup professional textile detergent
  • 1/3 cup soda ash
  • Measuring cups and spoons
  • Two 5-gallon buckets or plastic containers
  • 1 tablespoon urea powder
  • 1-2 tablespoons fiber-reactive dye
  • 3 cups non-iodized salt
  • Rubber gloves
  • 2-3-cup plastic mixing container
  • Ruler
  • String
  • Two binder clips
  • Stool
  • Spring clamp

Directions:

1.Wash fabric with professional textile detergent, following manufacturer instructions. Combine soda ash and 3 gallons of warm water in a bucket, stirring until dissolved.

2. Submerge fabric in soda ash mixture. Do not overstuff; instead, soak only fabric that easily fits in bucket. Allow fabric to soak in soda ash mixture for at least 30 minutes.

3. Combine urea powder and 1 cup warm water in a mixing cup. Pour a few tablespoons of urea mixture into a plastic mixing container with fiber-reactive dye in bottom. Work the powder and urea water into a smooth paste, then stir in the rest of the urea mixture to make a concentrate.

4. Add salt to 3 gallons of warm water in your dyeing tub, stirring until dissolved.

5. To create the lightest shade in your ombre pattern, add about 1/3 cup dye concentrate to saltwater and stir.

6. Wipe the inside of dye tub to prevent unwanted dye marks on fabric.

7. Create a tool to help you hold your fabric longer by tying strings to two binder clips and then wrapping the string around a ruler. Wring out fabric and attach binder clips.

8. Dip fabric to desired point and hold for 10 minutes or until you reach preferred color intensity.

9. With clean, gloved hands, remove fabric from dye. Hold undyed end of fabric with one hand while wringing out excess dye with the other.

10. Place dyed fabric on a clean surface protected from the dyeing area.

11. To create the next intensity of dye, pour about 1/3 cup of the dye concentrate into the dye tub and stir.

12. Dip fabric to desired point (we suggest several inches below your last dip point for a noticeable progression) and hold for twice the amount of time of first level or until you reach preferred color strength.

13. Repeat steps 8 through 12, each time doubling the amount of dye you add and the amount of time you leave the fabric submerged. For more than three levels of ombre, you’ll need to make more dye concentrate. Use a spring clamp and stool or ladder to hold fabric while dyeing if desired.

14. Rinse fabric with cold running water until water runs clear.

15. Wring fabric again, squeezing out as much excess water and dye as possible.

16. Wash fabric in hot water using professional textile detergent. If you’re unable to wash immediately, lay fabric flat on clean plastic wrap and wrap completely to prevent unwanted dye marks and drying.

What are some ways you add DIY accents to your home? – Cute Beltz

Cute Beltz - Belts for Kids

Toddler Belts & Kids Belts

Advertisements

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s